Industrial (conductivity tester)

Industrial conductivity tester 1.Scale: 0~2000ms/cm 2.Output:4~20mA 3.Temperature:0-100C conductivity tester

DMD200 series conductivity analyzer

 

Brief Introduction

DMD200 series conductivity intelligent analyzer is coupled with powerful and stable industrial microprocessor. It’s strong anti-interference and simple maintenance. DMD200 can connect with various types of electrodes and then can be widely used in water treatment, chemical industrial process, paper industry and food industry. The built-in dot matrix LCD can display conductivity values, mV value, temperature and alarm settings. Configuration menu is simple and flexible, easy for operation.

DMD200 can be connected with digital smart electrode which made by DAMING INSTRUMENT, to achieve full digital detection and communication. Digital smart electrode build-in patented chip, can be pre-calibrated to plug and play on industrial site. Because of digital communications between DMD200 analyzer and the smart electrode, the anti-jamming ability of DMD200 analyzer is much better than the conventional conductivity analyzer. It’s especially suitable for serious industrial scene with strong interference.

 

Technical parameter:

Power supply	100 ~ 240 VAC 50/60Hz.
Input sensor signal	Single electrode input, 3 kinds of input signal: l         2 wire digital input (when use DMD200 supported smart electrode). l         6 wire analog input (no temperature compensation). l         8 wire analog input (include 2 wire temperature compensation).
Measurement range	0 ~ 2000 ms/cm, -1999mV~+1999mV,-30°C~130°C.
Display type	LCD.
Display information	Conductivity (μs/cm), mV, temperature, proportion of 4~20mA output, alarm number.
Temperature compensation	Automatic.
Transmission signal	4 to 20mA isolated output.
Alarm output	2 separate relay output: H, L
Conductivity accuracy	±1%F.S.
Temperature accuracy	0.1°C
Dimension	96×96×120mm
Highlight	Smart electrode utilize digital communication, distance beyond 1000m. Strong anti interference. Pre-calibration, lifespan auto detect.

Note: Electrode is optional.

Industrial (conductivity tester)